Assign clear ownership for each element of non-destructive testing in equipment assessment across the functions involved.
Non-Destructive Testing Techniques and Their Applications in Equipment Assessment
A structured, applied course in non-destructive testing in equipment assessment — designed to be used the week you return.
📍 Istanbul🗓️ 5 training days📚 4 modules🎓 Accredited certificate
5intensive training days
4scientific modules
8training sessions
32detailed points
Course Overview
Spares strategy for non-destructive testing in equipment assessment is an availability decision disguised as a cost decision. Equipment involved in equipment assessment rarely fails without warning; the warning is usually in data nobody reviewed. It is designed for mixed groups, so that this area of engineering and maintenance work is examined from more than one functional angle. Where non-destructive testing in equipment assessment is measured, it improves; where it is only discussed, it drifts. A common pattern is strong design of this part of engineering and maintenance work paired with weak follow-through. The result is the confidence to make and defend decisions about equipment assessment under scrutiny. This programme builds non-destructive testing in equipment assessment from first principles, without padding and without omitting what matters. The programme uses small-group work so that each participant's treatment of equipment assessment is examined, not just described. Work concludes with a self-assessment of the wider engineering and maintenance work agenda that participants can repeat annually.
Expected Learning Outcomes
Define the scope and boundaries of equipment assessment so that responsibility for it is unambiguous.
Specify acceptance criteria for work performed on non-destructive testing in equipment assessment.
Set a realistic target state for equipment assessment and a defensible route to it.
Plan and schedule work on non-destructive testing in equipment assessment to reduce unplanned downtime.
Apply safe isolation, permit and lockout controls to work on equipment assessment.
Build the competence framework for technicians working on non-destructive testing in equipment assessment.
Who Should Attend
Maintenance managers and planners responsible for non-destructive testing in equipment assessment.
Project engineers commissioning assets involved in equipment assessment.
Reliability engineers analysing failures in non-destructive testing in equipment assessment.
Quality staff verifying that equipment assessment performs as designed.
Operations staff who encounter the consequences of non-destructive testing in equipment assessment directly.
Finance staff assessing maintenance and replacement spend on equipment assessment.
Course Modules
Non-destructive testing in equipment assessment: inspection, testing and acceptance criteria
2 sessions · 8 pointsSession 1Investigating the failure on non-destructive testing in equipment assessment that keeps returning
- Confirm isolation and permit requirements before any work on non-destructive testing in equipment assessment.
- Set inspection intervals for equipment assessment from condition data where it exists.
- Establish who is informed, consulted and accountable in non-destructive testing in equipment assessment.
- Define acceptance criteria for completed work on equipment assessment.
Session 2Repair or replace: making the case on equipment assessment
- Remove steps in non-destructive testing in equipment assessment that add effort without adding assurance.
- Calculate the ratio of planned to reactive work on equipment assessment.
- Confirm lubrication, alignment and balance standards applied to non-destructive testing in equipment assessment.
- Assign a criticality rating to equipment assessment that drives work order priority.
Equipment assessment: history, documentation and competence
2 sessions · 8 pointsSession 1Making equipment assessment work when resources are constrained
- Define the turnaround scope for non-destructive testing in equipment assessment and freeze it before mobilisation.
- Map the handovers in equipment assessment between functions and secure them.
- Assess energy loss attributable to the condition of non-destructive testing in equipment assessment.
- Confirm that reporting on equipment assessment reaches the people who can act.
Session 2What condition data on equipment assessment is telling you early
- Confirm that contractual obligations around non-destructive testing in equipment assessment are understood.
- Build the life cycle cost model supporting repair or replace on equipment assessment.
- Verify contractor competence and method statements for non-destructive testing in equipment assessment.
- Draft the minimum viable maintenance procedure for equipment assessment.
Equipment assessment: choosing the right maintenance strategy
2 sessions · 8 pointsSession 1Getting other functions to support equipment assessment
- Identify critical spares for non-destructive testing in equipment assessment and confirm lead times against consequence.
- Establish the boundary of equipment assessment and record what sits outside it.
- Test the procedure for non-destructive testing in equipment assessment against a realistic scenario.
- Identify the data already collected that bears on equipment assessment.
Session 2Planning work on non-destructive testing in equipment assessment so it does not become reactive
- Specify condition monitoring on non-destructive testing in equipment assessment that gives usable warning time.
- Close out actions on equipment assessment rather than leaving them open indefinitely.
- Write down the assumptions underpinning the approach to non-destructive testing in equipment assessment.
- Choose the maintenance strategy for equipment assessment based on failure pattern, not tradition.
Equipment assessment: spares, logistics and availability
2 sessions · 8 pointsSession 1Controlling turnaround scope on equipment assessment
- Set the review interval for non-destructive testing in equipment assessment and who attends.
- Update drawings and documentation after every modification to equipment assessment.
- Distinguish symptoms from causes when non-destructive testing in equipment assessment underperforms.
- Estimate the true cost of one hour of unplanned downtime on equipment assessment.
Session 2The decisions in equipment assessment that cannot be delegated
- Arrange the handover of non-destructive testing in equipment assessment so capability survives staff changes.
- Decide what will be stopped to create capacity for equipment assessment.
- Identify where judgement in non-destructive testing in equipment assessment is legitimate and where it is not.
- Record who is competent to work on equipment assessment and when requalification is due.
Choose the package that suits you
Silver Package
At least 3 people
USD1,250
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Gold Package
At least 3 people
USD1,850
- 5-night stay in a 5-star hotel
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Complete your registration
We will contact you within one business day to confirm.