Verify that contractors performing electrical connection inspection meet the same standard as direct employees.
Managing Periodic Inspection Programmes for Critical Electrical Connections
Turn electrical connection inspection from a stated policy into a practice your organisation can evidence.
📍 Tunis🗓️ 5 training days📚 4 modules🎓 Accredited certificate
5intensive training days
4scientific modules
8training sessions
32detailed points
Course Overview
Safety performance on electrical connection inspection degrades quietly during periods when nothing goes wrong. Where this strand of occupational health and safety depends on the vigilance of one experienced person, it is not yet a system. Where this area of occupational health and safety is measured, it improves; where it is only discussed, it drifts. The course leaves participants able to diagnose weaknesses in electrical connection inspection before they become incidents. This programme builds this part of occupational health and safety from first principles, without padding and without omitting what matters. Most organisations already have a policy on this strand of occupational health and safety; far fewer can show it working. Discussion is anchored to worked examples of electrical connection inspection rather than to abstract argument. Participants who influence the occupational health and safety capability without directly controlling it will find the content directly usable. It ends with a prioritised list of changes to this aspect of occupational health and safety that the participant is prepared to defend internally.
Expected Learning Outcomes
Review contracts and agreements for the obligations they create around electrical connection inspection.
Close out corrective actions on electrical connection inspection rather than leaving them open.
Establish reporting routes for hazards and near misses involving electrical connection inspection that people will actually use.
Anticipate the objections that electrical connection inspection will attract internally and answer them in advance.
Recognise early indicators that electrical connection inspection is drifting away from its intended design.
Carry out a structured risk assessment of electrical connection inspection and rank findings by consequence.
Who Should Attend
Occupational health practitioners monitoring exposure from electrical connection inspection.
Training and development staff building internal capability in electrical connection inspection.
Training officers building competence in electrical connection inspection.
Emergency response and rescue team leaders covering electrical connection inspection.
Members of committees that take decisions affecting electrical connection inspection.
Contractor and subcontractor supervisors performing electrical connection inspection.
Course Modules
Electrical connection inspection: protective equipment and its verification
2 sessions · 8 pointsSession 1Closing out electrical connection inspection and capturing what was learned
- Plan the sequence in which improvements to electrical connection inspection will be introduced.
- Decide what will be stopped to create capacity for electrical connection inspection.
- Benchmark the organisation's electrical connection inspection against comparable operations.
- Set out how exceptions to electrical connection inspection are requested and approved.
Session 2Making near-miss reporting on electrical connection inspection safe to do
- Confirm that those complying with electrical connection inspection understand why it exists.
- Define the trigger that would require electrical connection inspection to be redesigned.
- Make the reporting route for hazards in electrical connection inspection short and non-punitive.
- Confirm that controls on electrical connection inspection sit as high up the hierarchy as reasonably practicable.
Electrical connection inspection: reporting, investigation and root cause
2 sessions · 8 pointsSession 1Checking that protective equipment for electrical connection inspection actually protects
- Establish what evidence demonstrates electrical connection inspection is under control.
- Check the procedure for electrical connection inspection against how the work is actually done.
- Prepare the evidence pack a regulator would ask for on electrical connection inspection.
- Test that protective equipment specified for electrical connection inspection fits and is maintained.
Session 2The exposure from electrical connection inspection that shows up years later
- Rehearse the briefing on electrical connection inspection that would follow an incident.
- Record what was learned when electrical connection inspection did not go as planned.
- Assess long-term health exposure created by electrical connection inspection and arrange surveillance.
- Estimate the resource electrical connection inspection requires to run as designed.
Electrical connection inspection: contractors and shared workplaces
2 sessions · 8 pointsSession 1Comparing electrical connection inspection with recognised practice
- Review whether electrical connection inspection is aligned with the objectives of the work site.
- Close out corrective actions on electrical connection inspection with a named owner and date.
- Ask the people doing electrical connection inspection what makes the procedure hard to follow.
- Establish who is informed, consulted and accountable in electrical connection inspection.
Session 2Moving electrical connection inspection from approval to execution
- Record who is authorised to work on electrical connection inspection and when authorisation expires.
- Set escalation thresholds for electrical connection inspection that work out of hours.
- Rehearse the emergency and rescue plan for electrical connection inspection, do not just publish it.
- Verify permits covering electrical connection inspection are issued by someone competent to assess the hazard.
Electrical connection inspection: occupational health and long-term exposure
2 sessions · 8 pointsSession 1Investigating an incident involving electrical connection inspection without hunting for blame
- Verify contractor competence and method statements for electrical connection inspection.
- Arrange the handover of electrical connection inspection so capability survives staff changes.
- Confirm isolation and lockout arrangements for electrical connection inspection are proven before work starts.
- Identify the hazards in electrical connection inspection and rank them by consequence, not by frequency.
Session 2Why a good control on electrical connection inspection stops being used
- Confirm the training cycle sustaining competence in electrical connection inspection is current.
- Check that lessons from electrical connection inspection reached other sites doing similar work.
- Map the handovers in electrical connection inspection between functions and secure them.
- Prepare the summary of electrical connection inspection that senior management will read.
Choose the package that suits you
Silver Package
At least 3 people
USD1,250
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Gold Package
At least 3 people
USD1,850
- 5-night stay in a 5-star hotel
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Complete your registration
We will contact you within one business day to confirm.