Assets involved in automated safety systems routinely outlive the engineers who commissioned them. The energy transition has not removed the need for rigour in the practice within energy and hydrocarbon operations; it has added to it. Participants gain a clear basis for measuring what the energy and hydrocarbon operations capability has actually achieved. Participants leave with a method for automated safety systems, not a set of opinions about it. The programme suits teams tackling this area of energy and hydrocarbon operations together as readily as individuals attending alone. Each session closes with a decision the participant must justify about this strand of energy and hydrocarbon operations in their own setting. Progress on automated safety systems is usually lost in the gap between approval and execution. Benchmarking exercises repeatedly place this aspect of energy and hydrocarbon operations among the areas with the widest performance spread. The programme closes with an action plan for this strand of energy and hydrocarbon operations that each participant writes for their own organisation.
Expected Learning Outcomes
✓
Integrate automated safety systems into existing management routines rather than running it separately.
✓
Review contracts and agreements for the obligations they create around automated safety systems.
✓
Define the escalation path for abnormal conditions detected in automated safety systems.
✓
Evaluate the environmental obligations arising from automated safety systems.
✓
Verify that improvements to automated safety systems have held six months after they were introduced.
✓
Specify the instrumentation and data needed to monitor automated safety systems reliably.
✓
Quantify the production impact of decisions taken on automated safety systems.
Who Should Attend
✓
Project engineers delivering capital work involving automated safety systems.
✓
Managers of multi-site operations seeking consistency in automated safety systems.
✓
Managers in small and medium organisations who own automated safety systems alongside other duties.
✓
Graduate and newly assigned engineers taking responsibility for automated safety systems.
✓
Consultants and service company personnel supporting clients on automated safety systems.
✓
Maintenance and reliability engineers supporting automated safety systems.
Course Modules
Open any module to see its sessions and topics.
01
Automated safety systems: contracts, contractors and service delivery
2 sessions · 8 points
Session 1The operating limits on automated safety systems and what happens beyond them
Draft the minimum viable operating procedure for automated safety systems.
Check that management of change is applied to every modification of automated safety systems.
Model the economics of automated safety systems at low, base and high price cases.
Name a single owner for each element of automated safety systems.
Session 2Building the investment case for automated safety systems that finance will accept
Test the procedure for automated safety systems against a realistic scenario.
Decide what will be stopped to create capacity for automated safety systems.
Confirm contractor competence records for anyone working on automated safety systems.
Confirm the inspection interval for automated safety systems is based on condition, not habit.
02
Automated safety systems: instrumentation, data and condition monitoring
2 sessions · 8 points
Session 1Holding contractors on automated safety systems to the standard you hold yourself
Review whether automated safety systems is aligned with the objectives of the operating asset.
Assess the emissions and discharge attributable to automated safety systems.
Confirm handover documentation for automated safety systems is complete and current.
Estimate the resource automated safety systems requires to run as designed.
Session 2Building the method for automated safety systems step by step
Establish what evidence demonstrates automated safety systems is under control.
Map the handovers in automated safety systems between functions and secure them.
Check that automated safety systems still works when volumes rise unexpectedly.
Establish the boundary of automated safety systems and record what sits outside it.
03
Automated safety systems: planning, shutdowns and execution windows
2 sessions · 8 points
Session 1Competence and handover on automated safety systems when experienced staff leave
Check that the permit regime covering automated safety systems matches the actual hazard.
Record what was learned when automated safety systems did not go as planned.
Review the instrumentation on automated safety systems for coverage gaps.
Plan the automated safety systems scope so it fits the available shutdown window.
Session 2Comparing automated safety systems with recognised practice
Verify isolation points for automated safety systems are proven and documented.
Agree what will be standardised in automated safety systems and what will not.
Verify emergency response arrangements cover the scenarios automated safety systems can create.
Identify critical spares for automated safety systems and confirm lead times.
04
Automated safety systems: incidents, lessons and continual improvement
2 sessions · 8 points
Session 1Fitting automated safety systems into the shutdown plan without extending it
Arrange the handover of automated safety systems so capability survives staff changes.
Define the safe operating envelope for automated safety systems and how deviations are detected.
Set out the decisions in automated safety systems that require sign-off and by whom.
Record the technical rationale for the chosen approach to automated safety systems.
Session 2Escalation and decision rights in automated safety systems
Reduce the variation in how automated safety systems is carried out between teams.
Review incident and near-miss history involving automated safety systems.
Set the trigger for a life-extension versus replacement study on automated safety systems.
Record the rationale for each significant choice made about automated safety systems.
Choose the package that suits you
Silver Package
At least 3 people
USD1,250
Workshop or Program Participation
Airport Transfers
Customized Badge
Expert Mentorship (Private Sessions)
Supervision & Secretarial Services
Accredited Certificate of Participation
Complete Training Kit
Coffee Break
Closing Ceremony
Gold Package
At least 3 people
USD1,850
5-night stay in a 5-star hotel
Workshop or Program Participation
Airport Transfers
Customized Badge
Expert Mentorship (Private Sessions)
Supervision & Secretarial Services
Accredited Certificate of Participation
Complete Training Kit
Coffee Break
Closing Ceremony
Complete your registration
We will contact you within one business day to confirm.
