Select and verify the protective equipment required for electrical safety and hazard assessment.
Electrical Safety and Assessment of Associated Hazards
A structured, applied course in electrical safety and hazard assessment — designed to be used the week you return.
📍 Istanbul🗓️ 5 training days📚 4 modules🎓 Accredited certificate
5intensive training days
4scientific modules
8training sessions
32detailed points
Course Overview
Almost every serious incident involving electrical safety and hazard assessment was preceded by a signal somebody noticed and nobody escalated. Where hazard assessment depends on the vigilance of one experienced person, it is not yet a system. Teams frequently over-invest in documenting the occupational health and safety discipline and under-invest in testing it. Applied research in occupational health and safety consistently shows that early structure around electrical safety and hazard assessment reduces downstream rework. The programme converts the occupational health and safety capability from an area of general awareness into a set of repeatable practices. Participants test their assumptions about hazard assessment against scenarios designed to break weak ones. It is pitched for practitioners with responsibility for electrical safety and hazard assessment, not for observers of it. They acquire practical criteria for judging when hazard assessment is working and when it is only appearing to. It closes by agreeing the smallest change to this area of occupational health and safety that would make a visible difference.
Expected Learning Outcomes
Build the safety case or justification supporting hazard assessment.
Diagnose whether a problem in electrical safety and hazard assessment is one of design, resourcing or discipline.
Audit the application of controls on hazard assessment in the field, not on paper.
Plan the handover of electrical safety and hazard assessment so that capability is not lost when key staff move on.
Build the internal capability for hazard assessment rather than depending on external support indefinitely.
Carry out a structured risk assessment of electrical safety and hazard assessment and rank findings by consequence.
Who Should Attend
Contractor and subcontractor supervisors performing electrical safety and hazard assessment.
Staff seconded into improvement work on hazard assessment.
Senior managers who sign the safety policy covering electrical safety and hazard assessment.
Facility and plant managers accountable for hazard assessment.
Engineering and maintenance staff whose work involves electrical safety and hazard assessment.
Risk managers assessing the exposure created by hazard assessment.
Course Modules
Electrical safety and hazard assessment: leading indicators, audit and assurance
2 sessions · 8 pointsSession 1Why a good control on electrical safety and hazard assessment stops being used
- Prepare the summary of electrical safety and hazard assessment that senior management will read.
- Prepare the evidence pack a regulator would ask for on hazard assessment.
- Check that lessons from electrical safety and hazard assessment reached other sites doing similar work.
- Test that protective equipment specified for hazard assessment fits and is maintained.
Session 2Making near-miss reporting on hazard assessment safe to do
- Close out corrective actions on electrical safety and hazard assessment with a named owner and date.
- Identify the hazards in hazard assessment and rank them by consequence, not by frequency.
- Identify single points of dependency in electrical safety and hazard assessment and reduce them.
- Verify contractor competence and method statements for hazard assessment.
Hazard assessment: procedures, permits and practical controls
2 sessions · 8 pointsSession 1Escalation and decision rights in hazard assessment
- Check that records of electrical safety and hazard assessment answer the questions likely to be asked.
- Establish the boundary of hazard assessment and record what sits outside it.
- Audit application of electrical safety and hazard assessment controls at the workface.
- Arrange the handover of hazard assessment so capability survives staff changes.
Session 2Reading the current state of hazard assessment honestly
- Make the reporting route for hazards in electrical safety and hazard assessment short and non-punitive.
- Identify the data already collected that bears on hazard assessment.
- Assess long-term health exposure created by electrical safety and hazard assessment and arrange surveillance.
- Map the handovers in hazard assessment between functions and secure them.
Hazard assessment: contractors and shared workplaces
2 sessions · 8 pointsSession 1Who answers for hazard assessment, and to whom
- Reduce the variation in how electrical safety and hazard assessment is carried out between teams.
- Record the rationale for each significant choice made about hazard assessment.
- Anticipate the objections electrical safety and hazard assessment will raise and prepare the answers.
- Agree what will be standardised in hazard assessment and what will not.
Session 2Who is competent to work on electrical safety and hazard assessment, and how you know
- Confirm that contractual obligations around electrical safety and hazard assessment are understood.
- Build the internal briefing that explains hazard assessment to those affected.
- Ask the people doing electrical safety and hazard assessment what makes the procedure hard to follow.
- Record who is authorised to work on hazard assessment and when authorisation expires.
Hazard assessment: protective equipment and its verification
2 sessions · 8 pointsSession 1The exposure from hazard assessment that shows up years later
- Investigate the last incident involving electrical safety and hazard assessment to root cause, not to immediate cause.
- Define acceptance criteria for hazard assessment in advance.
- Check that electrical safety and hazard assessment still works when volumes rise unexpectedly.
- Verify permits covering hazard assessment are issued by someone competent to assess the hazard.
Session 2Investigating an incident involving hazard assessment without hunting for blame
- Confirm the training cycle sustaining competence in electrical safety and hazard assessment is current.
- Assign responsibility for keeping documentation of hazard assessment current.
- Apply management of change to any modification affecting electrical safety and hazard assessment.
- Check the procedure for hazard assessment against how the work is actually done.
Choose the package that suits you
Silver Package
At least 3 people
USD1,250
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Gold Package
At least 3 people
USD1,850
- 5-night stay in a 5-star hotel
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Complete your registration
We will contact you within one business day to confirm.