Build the competence framework for technicians working on radiographic weld inspection.
Designing Radiographic Inspection Protocols for Industrial Weld Quality
Build a working method for radiographic weld inspection that stands up to scrutiny and survives daily pressure.
📍 Tripoli🗓️ 5 training days📚 4 modules🎓 Accredited certificate
5intensive training days
4scientific modules
8training sessions
32detailed points
Course Overview
Maintenance budgets are cut on radiographic weld inspection in good years and paid for in bad ones. The result is the confidence to make and defend decisions about this part of engineering and maintenance work under scrutiny. Applied research in engineering and maintenance work consistently shows that early structure around this aspect of engineering and maintenance work reduces downstream rework. Progress on radiographic weld inspection is usually lost in the gap between approval and execution. The programme uses small-group work so that each participant's treatment of the wider engineering and maintenance work agenda is examined, not just described. Participants leave with a method for the practice within engineering and maintenance work, not a set of opinions about it. It is written for people who have to make radiographic weld inspection work with the resources they already have. The course ends by identifying what the participant will stop doing to make this aspect of engineering and maintenance work sustainable.
Expected Learning Outcomes
Draw practical lessons from failures in radiographic weld inspection without assigning blame that suppresses reporting.
Anticipate the objections that radiographic weld inspection will attract internally and answer them in advance.
Investigate repeat failures on radiographic weld inspection to root cause.
Test the organisation's response to radiographic weld inspection under conditions that are less than ideal.
Measure maintenance performance on radiographic weld inspection with indicators that drive behaviour.
Specify acceptance criteria for work performed on radiographic weld inspection.
Who Should Attend
Safety officers reviewing hazards created by work on radiographic weld inspection.
Inspection and integrity engineers assessing radiographic weld inspection.
Reliability engineers analysing failures in radiographic weld inspection.
Consultants and advisers supporting clients on radiographic weld inspection.
Engineering supervisors allocating work on radiographic weld inspection.
Coordinators responsible for keeping records and documentation of radiographic weld inspection current.
Course Modules
Radiographic weld inspection: inspection, testing and acceptance criteria
2 sessions · 8 pointsSession 1What has to be agreed before work on radiographic weld inspection starts
- Anticipate the objections radiographic weld inspection will raise and prepare the answers.
- Check that records of radiographic weld inspection answer the questions likely to be asked.
- Set the review interval for radiographic weld inspection and who attends.
- Establish what evidence demonstrates radiographic weld inspection is under control.
Session 2Planning work on radiographic weld inspection so it does not become reactive
- Investigate repeat failures on radiographic weld inspection to root cause, not to component.
- Reduce the variation in how radiographic weld inspection is carried out between teams.
- Agree the indicators that will show whether radiographic weld inspection is improving.
- Choose the maintenance strategy for radiographic weld inspection based on failure pattern, not tradition.
Radiographic weld inspection: failure modes, consequence and criticality
2 sessions · 8 pointsSession 1The decisions in radiographic weld inspection that cannot be delegated
- Identify single points of dependency in radiographic weld inspection and reduce them.
- Set escalation thresholds for radiographic weld inspection that work out of hours.
- Define acceptance criteria for completed work on radiographic weld inspection.
- Collect evidence on the present handling of radiographic weld inspection before proposing changes.
Session 2Investigating the failure on radiographic weld inspection that keeps returning
- Prepare the response for the most likely failure in radiographic weld inspection.
- Confirm isolation and permit requirements before any work on radiographic weld inspection.
- Verify contractor competence and method statements for radiographic weld inspection.
- List the credible failure modes of radiographic weld inspection and the consequence of each.
Radiographic weld inspection: history, documentation and competence
2 sessions · 8 pointsSession 1Getting other functions to support radiographic weld inspection
- Identify the data already collected that bears on radiographic weld inspection.
- Compare the cost of radiographic weld inspection with the cost of its absence.
- Plan the sequence in which improvements to radiographic weld inspection will be introduced.
- Record what was learned when radiographic weld inspection did not go as planned.
Session 2Isolating radiographic weld inspection safely before work begins
- Set out the decisions in radiographic weld inspection that require sign-off and by whom.
- Draft the minimum viable maintenance procedure for radiographic weld inspection.
- Write down the assumptions underpinning the approach to radiographic weld inspection.
- Map the handovers in radiographic weld inspection between functions and secure them.
Radiographic weld inspection: choosing the right maintenance strategy
2 sessions · 8 pointsSession 1How radiographic weld inspection actually fails, and how much warning you get
- Name a single owner for each element of radiographic weld inspection.
- Decide what will be stopped to create capacity for radiographic weld inspection.
- Assign a criticality rating to radiographic weld inspection that drives work order priority.
- Verify six months later that changes to radiographic weld inspection have held.
Session 2Maintenance indicators for radiographic weld inspection that change behaviour
- Benchmark the organisation's radiographic weld inspection against comparable operations.
- Set maintenance indicators for radiographic weld inspection that reward planning rather than heroics.
- Estimate the resource radiographic weld inspection requires to run as designed.
- Establish the boundary of radiographic weld inspection and record what sits outside it.
Choose the package that suits you
Silver Package
At least 3 people
USD1,250
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Gold Package
At least 3 people
USD1,850
- 5-night stay in a 5-star hotel
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Complete your registration
We will contact you within one business day to confirm.