Investigate repeat failures on periodic vibration monitoring to root cause.
Building Periodic Vibration Monitoring Programmes for Critical Equipment
Build a working method for periodic vibration monitoring that stands up to scrutiny and survives daily pressure.
📍 Tripoli🗓️ 5 training days📚 4 modules🎓 Accredited certificate
5intensive training days
4scientific modules
8training sessions
32detailed points
Course Overview
Maintenance budgets are cut on periodic vibration monitoring in good years and paid for in bad ones. It is pitched for practitioners with responsibility for this strand of engineering and maintenance work, not for observers of it. Content is organised around the decisions practitioners actually face in the engineering and maintenance work capability, not around theory headings. Participants develop a defensible line of reasoning for the choices they make about periodic vibration monitoring. Where the engineering and maintenance work discipline is measured, it improves; where it is only discussed, it drifts. The difficulty is not agreeing that this aspect of engineering and maintenance work matters — it is deciding what to stop doing to make room for it. Exercises escalate in difficulty, ending with the ambiguous situations that make periodic vibration monitoring hard in practice. The programme closes with an action plan for this strand of engineering and maintenance work that each participant writes for their own organisation.
Expected Learning Outcomes
Apply safe isolation, permit and lockout controls to work on periodic vibration monitoring.
Establish escalation routes for periodic vibration monitoring that work outside normal hours.
Set criticality ratings that drive work order priority for periodic vibration monitoring.
Build the inspection and test plan covering periodic vibration monitoring.
Handle the trade-offs in periodic vibration monitoring between speed, cost and assurance explicitly rather than implicitly.
Estimate what periodic vibration monitoring costs to run properly, and what is lost when it is not.
Who Should Attend
Plant and facility managers accountable for availability of periodic vibration monitoring.
Engineering supervisors allocating work on periodic vibration monitoring.
Safety officers reviewing hazards created by work on periodic vibration monitoring.
Staff seconded into improvement work on periodic vibration monitoring.
Procurement and contracting staff whose agreements set obligations around periodic vibration monitoring.
Finance staff assessing maintenance and replacement spend on periodic vibration monitoring.
Course Modules
Periodic vibration monitoring: safe isolation and permit control
2 sessions · 8 pointsSession 1Investigating the failure on periodic vibration monitoring that keeps returning
- Record what was learned when periodic vibration monitoring did not go as planned.
- Agree the indicators that will show whether periodic vibration monitoring is improving.
- Choose the maintenance strategy for periodic vibration monitoring based on failure pattern, not tradition.
- Verify contractor competence and method statements for periodic vibration monitoring.
Session 2The hard cases in periodic vibration monitoring and how to reason about them
- Rank the weaknesses in periodic vibration monitoring by consequence rather than by ease of fixing.
- Define acceptance criteria for completed work on periodic vibration monitoring.
- Set out the decisions in periodic vibration monitoring that require sign-off and by whom.
- Plan the sequence in which improvements to periodic vibration monitoring will be introduced.
Periodic vibration monitoring: failure modes, consequence and criticality
2 sessions · 8 pointsSession 1What condition data on periodic vibration monitoring is telling you early
- Map the handovers in periodic vibration monitoring between functions and secure them.
- List the credible failure modes of periodic vibration monitoring and the consequence of each.
- Confirm that those complying with periodic vibration monitoring understand why it exists.
- Set the review interval for periodic vibration monitoring and who attends.
Session 2Maintenance indicators for periodic vibration monitoring that change behaviour
- Prepare the response for the most likely failure in periodic vibration monitoring.
- Benchmark the organisation's periodic vibration monitoring against comparable operations.
- Compare the cost of periodic vibration monitoring with the cost of its absence.
- Investigate repeat failures on periodic vibration monitoring to root cause, not to component.
Periodic vibration monitoring: choosing the right maintenance strategy
2 sessions · 8 pointsSession 1Choosing a maintenance strategy for periodic vibration monitoring on evidence
- Reduce the variation in how periodic vibration monitoring is carried out between teams.
- Set out how exceptions to periodic vibration monitoring are requested and approved.
- Agree what will be standardised in periodic vibration monitoring and what will not.
- Agree the smallest change to periodic vibration monitoring that would be visibly useful.
Session 2Closing out periodic vibration monitoring and capturing what was learned
- Write down the assumptions underpinning the approach to periodic vibration monitoring.
- Define the trigger that would require periodic vibration monitoring to be redesigned.
- Collect evidence on the present handling of periodic vibration monitoring before proposing changes.
- Record the rationale for each significant choice made about periodic vibration monitoring.
Periodic vibration monitoring: history, documentation and competence
2 sessions · 8 pointsSession 1Planning work on periodic vibration monitoring so it does not become reactive
- Review whether periodic vibration monitoring is aligned with the objectives of the asset base.
- Assign a criticality rating to periodic vibration monitoring that drives work order priority.
- Identify where judgement in periodic vibration monitoring is legitimate and where it is not.
- Set maintenance indicators for periodic vibration monitoring that reward planning rather than heroics.
Session 2Moving periodic vibration monitoring from approval to execution
- Build the internal briefing that explains periodic vibration monitoring to those affected.
- Establish what evidence demonstrates periodic vibration monitoring is under control.
- Confirm isolation and permit requirements before any work on periodic vibration monitoring.
- Confirm that reporting on periodic vibration monitoring reaches the people who can act.
Choose the package that suits you
Silver Package
At least 3 people
USD1,250
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Gold Package
At least 3 people
USD1,850
- 5-night stay in a 5-star hotel
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Complete your registration
We will contact you within one business day to confirm.