Diagnose whether a problem in condition-based maintenance strategy is one of design, resourcing or discipline.
Building Maintenance Strategies Based on Actual Equipment Condition
Turn condition-based maintenance strategy from a stated policy into a practice your organisation can evidence.
📍 Tunis🗓️ 5 training days📚 4 modules🎓 Accredited certificate
5intensive training days
4scientific modules
8training sessions
32detailed points
Course Overview
Maintenance budgets are cut on condition-based maintenance strategy in good years and paid for in bad ones. It is appropriate for those preparing to take on wider responsibility for this aspect of engineering and maintenance work. Participants apply the engineering and maintenance work capability to their own asset base throughout, so the output is directly usable. A common pattern is strong design of condition-based maintenance strategy paired with weak follow-through. The course sets out a working method for the engineering and maintenance work discipline that participants can apply the week they return. The programme builds the judgement to know which parts of this area of engineering and maintenance work to standardise and which to leave flexible. Benchmarking exercises repeatedly place condition-based maintenance strategy among the areas with the widest performance spread. It closes by agreeing the smallest change to the wider engineering and maintenance work agenda that would make a visible difference.
Expected Learning Outcomes
Specify acceptance criteria for work performed on condition-based maintenance strategy.
Build the inspection and test plan covering condition-based maintenance strategy.
Measure maintenance performance on condition-based maintenance strategy with indicators that drive behaviour.
Draw practical lessons from failures in condition-based maintenance strategy without assigning blame that suppresses reporting.
Investigate repeat failures on condition-based maintenance strategy to root cause.
Apply a repeatable review cycle to condition-based maintenance strategy and act on what it produces.
Who Should Attend
Contractor supervisors performing work on condition-based maintenance strategy.
Finance staff assessing maintenance and replacement spend on condition-based maintenance strategy.
Mechanical, electrical and instrumentation technicians working on condition-based maintenance strategy.
Business partners who must understand condition-based maintenance strategy well enough to challenge it.
Inspection and integrity engineers assessing condition-based maintenance strategy.
Compliance and governance staff whose remit includes condition-based maintenance strategy.
Course Modules
Condition-based maintenance strategy: history, documentation and competence
2 sessions · 8 pointsSession 1Isolating condition-based maintenance strategy safely before work begins
- List the credible failure modes of condition-based maintenance strategy and the consequence of each.
- Distinguish symptoms from causes when condition-based maintenance strategy underperforms.
- Arrange the handover of condition-based maintenance strategy so capability survives staff changes.
- Review whether condition-based maintenance strategy is aligned with the objectives of the asset base.
Session 2Investigating the failure on condition-based maintenance strategy that keeps returning
- Decide what will be stopped to create capacity for condition-based maintenance strategy.
- Define acceptance criteria for completed work on condition-based maintenance strategy.
- Map the handovers in condition-based maintenance strategy between functions and secure them.
- Confirm isolation and permit requirements before any work on condition-based maintenance strategy.
Condition-based maintenance strategy: failure modes, consequence and criticality
2 sessions · 8 pointsSession 1Where condition-based maintenance strategy typically breaks, and why
- Rank the weaknesses in condition-based maintenance strategy by consequence rather than by ease of fixing.
- Verify six months later that changes to condition-based maintenance strategy have held.
- Plan the sequence in which improvements to condition-based maintenance strategy will be introduced.
- Benchmark the organisation's condition-based maintenance strategy against comparable operations.
Session 2Testing condition-based maintenance strategy before relying on it
- Compare the cost of condition-based maintenance strategy with the cost of its absence.
- Collect evidence on the present handling of condition-based maintenance strategy before proposing changes.
- Confirm that those complying with condition-based maintenance strategy understand why it exists.
- Set maintenance indicators for condition-based maintenance strategy that reward planning rather than heroics.
Condition-based maintenance strategy: inspection, testing and acceptance criteria
2 sessions · 8 pointsSession 1Moving condition-based maintenance strategy from approval to execution
- Close out actions on condition-based maintenance strategy rather than leaving them open indefinitely.
- Confirm that reporting on condition-based maintenance strategy reaches the people who can act.
- Prepare the response for the most likely failure in condition-based maintenance strategy.
- Check that condition-based maintenance strategy still works when volumes rise unexpectedly.
Session 2What condition data on condition-based maintenance strategy is telling you early
- Agree the smallest change to condition-based maintenance strategy that would be visibly useful.
- Identify single points of dependency in condition-based maintenance strategy and reduce them.
- Establish who is informed, consulted and accountable in condition-based maintenance strategy.
- Investigate repeat failures on condition-based maintenance strategy to root cause, not to component.
Condition-based maintenance strategy: safe isolation and permit control
2 sessions · 8 pointsSession 1How condition-based maintenance strategy actually fails, and how much warning you get
- Set the review interval for condition-based maintenance strategy and who attends.
- Set out how exceptions to condition-based maintenance strategy are requested and approved.
- Assign a criticality rating to condition-based maintenance strategy that drives work order priority.
- Verify contractor competence and method statements for condition-based maintenance strategy.
Session 2Planning work on condition-based maintenance strategy so it does not become reactive
- Define the trigger that would require condition-based maintenance strategy to be redesigned.
- Write down the assumptions underpinning the approach to condition-based maintenance strategy.
- Set escalation thresholds for condition-based maintenance strategy that work out of hours.
- Estimate the resource condition-based maintenance strategy requires to run as designed.
Choose the package that suits you
Silver Package
At least 3 people
USD1,250
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Gold Package
At least 3 people
USD1,850
- 5-night stay in a 5-star hotel
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Complete your registration
We will contact you within one business day to confirm.