Building Compliance Tracking Systems for International Safety Standards

A concise, decision-focused programme covering safety compliance tracking end to end.

📍 Cairo🗓️ 5 training days📚 4 modules🎓 Accredited certificate
5intensive training days
4scientific modules
8training sessions
32detailed points

Course Overview

Regulators judge safety compliance tracking on evidence of application, not on the existence of a document. A procedure for this aspect of occupational health and safety that people cannot follow under time pressure is not a control. The level assumes working familiarity with the work site but no prior formal training in the wider occupational health and safety agenda. Comparative studies of safety compliance tracking across sectors find the same handful of failure points recurring. Participants develop a defensible line of reasoning for the choices they make about this strand of occupational health and safety. It establishes a shared vocabulary for the wider occupational health and safety agenda so that teams can disagree productively about it. Improvement in safety compliance tracking stalls when it depends on one capable individual rather than a defined method. Participants apply this aspect of occupational health and safety to their own work site throughout, so the output is directly usable. Participants finish with a short, specific brief on the practice within occupational health and safety ready to put in front of a decision maker.

Expected Learning Outcomes

01

Verify that contractors performing safety compliance tracking meet the same standard as direct employees.

02

Translate policy on safety compliance tracking into procedures that hold up under day-to-day pressure.

03

Audit the application of controls on safety compliance tracking in the field, not on paper.

04

Present the case for investment in safety compliance tracking in terms that a finance function will accept.

05

Build a register of the risks attaching to safety compliance tracking and keep it current.

06

Integrate safety compliance tracking into the management of change process.

07

Set leading indicators for safety compliance tracking rather than relying on injury counts.

Who Should Attend

01

Training and development staff building internal capability in safety compliance tracking.

02

Risk and insurance staff assessing exposure from safety compliance tracking.

03

Facility and plant managers accountable for safety compliance tracking.

04

Engineering and maintenance staff whose work involves safety compliance tracking.

05

Specialists advising senior management on safety compliance tracking.

06

Occupational health practitioners monitoring exposure from safety compliance tracking.

Course Modules

01

Safety compliance tracking: protective equipment and its verification

2 sessions · 8 points

Session 1The decisions in safety compliance tracking that cannot be delegated

  • Set leading indicators for safety compliance tracking that predict rather than count.
  • Agree what will be standardised in safety compliance tracking and what will not.
  • Make the reporting route for hazards in safety compliance tracking short and non-punitive.
  • Decide what will be stopped to create capacity for safety compliance tracking.

Session 2Holding contractors on safety compliance tracking to your own standard

  • Build the competence framework that supports safety compliance tracking.
  • Identify the hazards in safety compliance tracking and rank them by consequence, not by frequency.
  • Collect evidence on the present handling of safety compliance tracking before proposing changes.
  • Record the rationale for each significant choice made about safety compliance tracking.
02

Safety compliance tracking: culture, human factors and why controls fail

2 sessions · 8 points

Session 1Writing a procedure for safety compliance tracking people can follow at 3 a.m.

  • Arrange the handover of safety compliance tracking so capability survives staff changes.
  • Assess long-term health exposure created by safety compliance tracking and arrange surveillance.
  • Check that lessons from safety compliance tracking reached other sites doing similar work.
  • Compare the cost of safety compliance tracking with the cost of its absence.

Session 2Investigating an incident involving safety compliance tracking without hunting for blame

  • Rehearse the emergency and rescue plan for safety compliance tracking, do not just publish it.
  • Confirm that controls on safety compliance tracking sit as high up the hierarchy as reasonably practicable.
  • Apply management of change to any modification affecting safety compliance tracking.
  • Ask the people doing safety compliance tracking what makes the procedure hard to follow.
03

Safety compliance tracking: contractors and shared workplaces

2 sessions · 8 points

Session 1Making near-miss reporting on safety compliance tracking safe to do

  • Set escalation thresholds for safety compliance tracking that work out of hours.
  • Close out corrective actions on safety compliance tracking with a named owner and date.
  • Test that protective equipment specified for safety compliance tracking fits and is maintained.
  • Confirm the training cycle sustaining competence in safety compliance tracking is current.

Session 2Reviewing safety compliance tracking when nothing has gone wrong

  • Distinguish symptoms from causes when safety compliance tracking underperforms.
  • Record who is authorised to work on safety compliance tracking and when authorisation expires.
  • Identify the data already collected that bears on safety compliance tracking.
  • Check that safety compliance tracking still works when volumes rise unexpectedly.
04

Safety compliance tracking: hazard identification and risk assessment

2 sessions · 8 points

Session 1Where safety compliance tracking typically breaks, and why

  • Review whether safety compliance tracking is aligned with the objectives of the work site.
  • Benchmark the organisation's safety compliance tracking against comparable operations.
  • Prepare the response for the most likely failure in safety compliance tracking.
  • Agree the smallest change to safety compliance tracking that would be visibly useful.

Session 2The permit regime safety compliance tracking needs, and the one it does not

  • Audit application of safety compliance tracking controls at the workface.
  • Verify contractor competence and method statements for safety compliance tracking.
  • Record what was learned when safety compliance tracking did not go as planned.
  • Prepare the evidence pack a regulator would ask for on safety compliance tracking.

Choose the package that suits you

Silver Package

At least 3 people

USD1,250
  • Workshop or Program Participation
  • Airport Transfers
  • Customized Badge
  • Expert Mentorship (Private Sessions)
  • Supervision & Secretarial Services
  • Accredited Certificate of Participation
  • Complete Training Kit
  • Coffee Break
  • Closing Ceremony

Gold Package

At least 3 people

USD1,850
  • 5-night stay in a 5-star hotel
  • Workshop or Program Participation
  • Airport Transfers
  • Customized Badge
  • Expert Mentorship (Private Sessions)
  • Supervision & Secretarial Services
  • Accredited Certificate of Participation
  • Complete Training Kit
  • Coffee Break
  • Closing Ceremony

Complete your registration

We will contact you within one business day to confirm.