Plan the training and refresher cycle sustaining competence in automated process safety systems.
Building Automated Safety Systems for Controlling Critical Processes
A structured, applied course in automated process safety systems — designed to be used the week you return.
📍 Tunis🗓️ 5 training days📚 4 modules🎓 Accredited certificate
5intensive training days
4scientific modules
8training sessions
32detailed points
Course Overview
A procedure for automated process safety systems that people cannot follow under time pressure is not a control. Safety performance on safety systems degrades quietly during periods when nothing goes wrong. The programme is built to be used, and every section of this strand of occupational health and safety it covers ends in something applicable. Participants gain a clear basis for measuring what automated process safety systems has actually achieved. Practitioner evidence points the same way: the wider occupational health and safety agenda improves fastest where responsibility for it is named and owned. It is appropriate for those preparing to take on wider responsibility for safety systems. The method assumes participants will be challenged on their handling of automated process safety systems and prepares them for it. The version of safety systems described in the manual and the version practised on the floor tend to diverge over time. The final session converts the week's work on the occupational health and safety discipline into commitments with owners and dates.
Expected Learning Outcomes
Communicate the purpose of safety systems to those who have to comply with it.
Close out corrective actions on automated process safety systems rather than leaving them open.
Integrate safety systems into the management of change process.
Document decisions about automated process safety systems in a form that remains useful after the people change.
Write procedures for safety systems that can be followed under real operating pressure.
Structure records of automated process safety systems so that they answer the questions an auditor will actually ask.
Who Should Attend
Analysts producing the data on which decisions about automated process safety systems rest.
Training officers building competence in safety systems.
Health and safety officers and advisers responsible for automated process safety systems.
Risk and insurance staff assessing exposure from safety systems.
Public sector officials applying automated process safety systems within a regulated framework.
Emergency response and rescue team leaders covering safety systems.
Course Modules
Automated process safety systems: procedures, permits and practical controls
2 sessions · 8 pointsSession 1Writing a procedure for automated process safety systems people can follow at 3 a.m.
- Prepare the evidence pack a regulator would ask for on automated process safety systems.
- Confirm isolation and lockout arrangements for safety systems are proven before work starts.
- Confirm that those complying with automated process safety systems understand why it exists.
- Identify where judgement in safety systems is legitimate and where it is not.
Session 2Why a good control on safety systems stops being used
- Reduce the variation in how automated process safety systems is carried out between teams.
- Decide what will be stopped to create capacity for safety systems.
- Arrange the handover of automated process safety systems so capability survives staff changes.
- Set out the decisions in safety systems that require sign-off and by whom.
Safety systems: emergency response and rescue
2 sessions · 8 pointsSession 1Auditing safety systems in the field rather than in the file
- Apply management of change to any modification affecting automated process safety systems.
- Confirm the training cycle sustaining competence in safety systems is current.
- Investigate the last incident involving automated process safety systems to root cause, not to immediate cause.
- Assess long-term health exposure created by safety systems and arrange surveillance.
Session 2Who is competent to work on safety systems, and how you know
- Check that records of automated process safety systems answer the questions likely to be asked.
- Check that lessons from safety systems reached other sites doing similar work.
- Close out actions on automated process safety systems rather than leaving them open indefinitely.
- Audit application of safety systems controls at the workface.
Safety systems: leading indicators, audit and assurance
2 sessions · 8 pointsSession 1Checking that protective equipment for safety systems actually protects
- Make the reporting route for hazards in automated process safety systems short and non-punitive.
- Verify permits covering safety systems are issued by someone competent to assess the hazard.
- Establish who is informed, consulted and accountable in automated process safety systems.
- Compare the cost of safety systems with the cost of its absence.
Session 2Who answers for automated process safety systems, and to whom
- Confirm that reporting on automated process safety systems reaches the people who can act.
- Verify contractor competence and method statements for safety systems.
- Set leading indicators for automated process safety systems that predict rather than count.
- Distinguish symptoms from causes when safety systems underperforms.
Safety systems: culture, human factors and why controls fail
2 sessions · 8 pointsSession 1What has to be agreed before work on safety systems starts
- Map the handovers in automated process safety systems between functions and secure them.
- Close out corrective actions on safety systems with a named owner and date.
- Confirm that controls on automated process safety systems sit as high up the hierarchy as reasonably practicable.
- Rehearse the briefing on safety systems that would follow an incident.
Session 2Reviewing safety systems when nothing has gone wrong
- Identify the hazards in automated process safety systems and rank them by consequence, not by frequency.
- Test that protective equipment specified for safety systems fits and is maintained.
- Verify six months later that changes to automated process safety systems have held.
- Establish what evidence demonstrates safety systems is under control.
Choose the package that suits you
Silver Package
At least 3 people
USD1,250
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Gold Package
At least 3 people
USD1,850
- 5-night stay in a 5-star hotel
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Complete your registration
We will contact you within one business day to confirm.