Specify acceptance criteria for work performed on real-time condition sensing.
Building Advanced Sensor Systems for Real-Time Equipment Condition Monitoring
Learn to design, measure and defend your organisation's approach to real-time condition sensing.
📍 Abu Dhabi🗓️ 5 training days📚 4 modules🎓 Accredited certificate
5intensive training days
4scientific modules
8training sessions
32detailed points
Course Overview
Maintenance budgets are cut on real-time condition sensing in good years and paid for in bad ones. It is appropriate for those preparing to take on wider responsibility for this strand of engineering and maintenance work. Ambition around this area of engineering and maintenance work outruns capacity unless the sequencing is deliberate. Participants finish able to explain real-time condition sensing to a non-specialist audience without losing precision. Where this strand of engineering and maintenance work is measured, it improves; where it is only discussed, it drifts. The teaching approach is deliberately practical: participants build a maintenance procedure for this aspect of engineering and maintenance work as they go. The course covers real-time condition sensing at the level of detail needed to act, and stops there. Participants leave with a first-ninety-days plan for the practice within engineering and maintenance work rather than a set of notes.
Expected Learning Outcomes
Establish what evidence would demonstrate that real-time condition sensing is under control.
Determine the failure modes of real-time condition sensing and the consequence of each.
Set criticality ratings that drive work order priority for real-time condition sensing.
Investigate repeat failures on real-time condition sensing to root cause.
Set a realistic target state for real-time condition sensing and a defensible route to it.
Sequence improvements to real-time condition sensing so that each step makes the next one easier.
Who Should Attend
Maintenance managers and planners responsible for real-time condition sensing.
Analysts producing the data on which decisions about real-time condition sensing rest.
Safety officers reviewing hazards created by work on real-time condition sensing.
Coordinators responsible for keeping records and documentation of real-time condition sensing current.
Inspection and integrity engineers assessing real-time condition sensing.
Engineering supervisors allocating work on real-time condition sensing.
Course Modules
Real-time condition sensing: inspection, testing and acceptance criteria
2 sessions · 8 pointsSession 1Making real-time condition sensing work when resources are constrained
- Test the procedure for real-time condition sensing against a realistic scenario.
- Establish the boundary of real-time condition sensing and record what sits outside it.
- Collect evidence on the present handling of real-time condition sensing before proposing changes.
- Check that records of real-time condition sensing answer the questions likely to be asked.
Session 2What condition data on real-time condition sensing is telling you early
- Verify six months later that changes to real-time condition sensing have held.
- Investigate repeat failures on real-time condition sensing to root cause, not to component.
- Prepare the response for the most likely failure in real-time condition sensing.
- Assign a criticality rating to real-time condition sensing that drives work order priority.
Real-time condition sensing: history, documentation and competence
2 sessions · 8 pointsSession 1Choosing a maintenance strategy for real-time condition sensing on evidence
- Arrange the handover of real-time condition sensing so capability survives staff changes.
- Confirm isolation and permit requirements before any work on real-time condition sensing.
- Build the internal briefing that explains real-time condition sensing to those affected.
- Assign responsibility for keeping documentation of real-time condition sensing current.
Session 2Investigating the failure on real-time condition sensing that keeps returning
- Define acceptance criteria for completed work on real-time condition sensing.
- Build the competence framework that supports real-time condition sensing.
- Set maintenance indicators for real-time condition sensing that reward planning rather than heroics.
- Compare the cost of real-time condition sensing with the cost of its absence.
Real-time condition sensing: failure modes, consequence and criticality
2 sessions · 8 pointsSession 1Who answers for real-time condition sensing, and to whom
- Check that real-time condition sensing still works when volumes rise unexpectedly.
- Identify the data already collected that bears on real-time condition sensing.
- Benchmark the organisation's real-time condition sensing against comparable operations.
- Rehearse the briefing on real-time condition sensing that would follow an incident.
Session 2How real-time condition sensing actually fails, and how much warning you get
- Distinguish symptoms from causes when real-time condition sensing underperforms.
- Set out the decisions in real-time condition sensing that require sign-off and by whom.
- Set out how exceptions to real-time condition sensing are requested and approved.
- Identify single points of dependency in real-time condition sensing and reduce them.
Real-time condition sensing: choosing the right maintenance strategy
2 sessions · 8 pointsSession 1Building lasting competence in real-time condition sensing
- Establish what evidence demonstrates real-time condition sensing is under control.
- Confirm that reporting on real-time condition sensing reaches the people who can act.
- Identify where judgement in real-time condition sensing is legitimate and where it is not.
- List the credible failure modes of real-time condition sensing and the consequence of each.
Session 2Planning work on real-time condition sensing so it does not become reactive
- Establish who is informed, consulted and accountable in real-time condition sensing.
- Agree the indicators that will show whether real-time condition sensing is improving.
- Verify contractor competence and method statements for real-time condition sensing.
- Choose the maintenance strategy for real-time condition sensing based on failure pattern, not tradition.
Choose the package that suits you
Silver Package
At least 3 people
USD1,250
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Gold Package
At least 3 people
USD1,850
- 5-night stay in a 5-star hotel
- Workshop or Program Participation
- Airport Transfers
- Customized Badge
- Expert Mentorship (Private Sessions)
- Supervision & Secretarial Services
- Accredited Certificate of Participation
- Complete Training Kit
- Coffee Break
- Closing Ceremony
Complete your registration
We will contact you within one business day to confirm.